This course is designed to keep the pilot proficient in the aircraft. This course also meets the requirements of aviation insurance companies annual training, and requirement for IFR Recent experience 61.57(c). Total time 2 days, 8 hours simulator, 8 hours classroom
Day One Morning
2 Hrs Classroom:
SOP’s (use of checklist and altitude calls)
CFIT (low visibility approach hazards)
2 hrs Simulator:
Familiarization, maneuvers, turns, climbs, descents, power & configurations, VOR tracking, VOR approach
Day One Afternoon
2 hrs Classroom:
ATC and Emergencies (what can ATC do?)
Thunderstorm Avoidance (methods to avoid convective weather)
2 hrs Simulator:
IFR Procedures, ILS, VOR, GPS approaches, and holding.
Day 2 Morning:
2 hrs Classroom:
Aircraft Systems (powerplant, electrical, fuel system, pneumatic and static, landing gear and brakes, environmental systems.)
2 hrs Simulator:
LOFT IFR Flight, abnormal procedures, system failures
Day 2 Afternoon
2 hrs Classroom:
FAR Part 61
FAR Part 91
2 hrs Simulator:
LOFT IFR Flight, abnormal procedures
Hello: I fly a 1984 Cessna Turbo Retractable 182 ( TR182 ). It’s got a 530W/430W combo. Is the sim hand flown 100% of the time? How much advance notice do you need to schedule the 2 day recurrent? Thanks, Jamie
Yes, Jamie, the course is flown all raw data, all hand flying. We can sometimes take you on short notice. Give us a quick call and we can see if we can fit you in. Otherwise, usually a week to 10 days is generally enough notice.
Thank you for your question. Unfortunately, RTC is not offering pilot training for G1000 at this time. Please keep us in mind if you ever
fly the round guages with the dials.
Dear Antoine,
Thank you for your question. Unfortunately, RTC does not train for the G1000 right now. We are considering it so please check back in the future.
Thanks,
Mary
Dear Antoine,
We are specialist at helping people regain their instrument proficiency. We do not have a simulator that
has a G1000 at this time. If you come, you will be in simulators with round steam gauges with dials.
Please let me know when you would like to attend. Call the office at 800 727 1014. Thanks.
Dear Antoine,
RTC does not offer G1000 training at the moment. Please check back with us at a later date.
Thanks for asking.
Mary
Dear Robert,
Our piston engine aircraft simulators are available to reserve in 2 hours blocks with an instructor for $210. You may reserve as many 2 hour blocks as you like. Call 800-727-1014 and let us know when you want to come train at RTC.
Thanks for your interest. We look forward to working with you in the near future.
Mary